#

Стандарты и Директивыand

Мы работаем на регулируемом глобальном рынке во многих странах. Таким образом, мы должны управлять требованиями, которые могут значительно отличаться в разных странах или регионах.
Общая цель наших менеджеров и служб - предложить надежную, устойчивую, высокопроизводительную продукцию, соответствующую нормативным требованиям и/или стандартам каждой территории, где она используется.
#
#

Standards and certifications

All you need to know about PPE standards

Сброс всех фильтров
Фильтр
Standards

EN ISO 20345: BASIC REQUIREMENTS FOR SAFETY FOOTWEAR

In reference to standard EN ISO 20344, this European standard defines the basic and the additional
(optional) requirements for safety footwear for the workplace, marked «S». The safety shoe is
equipped with safety toe caps designed to withstand a maximum impact of 200 joules and crushing
up to 15 kN.

Packaging Regulation (EU) 2025/40 (PPWR): Declarations &Packaging Inventory

Starting from 12th of August 2026 the Regulation (EU) 2025/40 harmonises the requirements on Packaging and Packaging Waste within the European Union. These requirements are being implemented in stages over a long time frame. Only the initial requirements will enter into force on August 12, 2026.

Certain requirements will only become applicable once the European Commission has published the corresponding Delegated Acts and harmonized standards.

To help you meet your obligations and any potential local Extended Producer Responsibility (EPR) requirements, DELTA PLUS GROUP offers you:

  • EU Declarations of Conformity (DoC) categorized by material type (Paper/Cardboard, PE, PP, PET, Steel, Textile, etc.) and packaging type, available in 20 languages.

  • The appendix "Inventory of packaging components" (Excel) listing, for each of our products, the components of each package as well as their Declaration of Conformity in order to facilitate your declarations to your national eco-organizations.

Go to the PPWR documents

EN812 : Bump caps for industry

MANDATORY 

Impact*: This PPE protects against impacts from knocks against structures or objects. It does not protect from the impact of a falling object at all. The
impact energy of the cap at the end of the test reached 12.25 J.
Penetration*: the tip of the mass used in the test (0.5 kg over 0.5 m) must not come into contact with the skull.
* The impact and penetration tests are performed at room temperature, at 50°C and at -10°C.
Should in no way be a substitute for an industry type helmet (EN397).

OPTIONAL

In extreme temperatures: impact and penetration tests are conducted at room temperature at -20°C or -30°C.
Protects against accidental short-term contact with a live electrical conductor up to 440 VAC.
Flammability: the helmet must not burn with fl ame emission more than 5 seconds after removal of the fl ame (F marking).