In reference to standard EN ISO 20344, this European standard defines the basic and the additional
(optional) requirements for safety footwear for the workplace, marked «S». The safety shoe is
equipped with safety toe caps designed to withstand a maximum impact of 200 joules and crushing
up to 15 kN.

This standard defines the test methods for safety footwear, protective footwear, and occupational
shoes. It may be used only in conjunction with standards EN ISO 20345 and EN ISO 20347, which
specify the requirements for the shoes as a function of specific levels of risk involved.

SCIP information

Connection elements or equipment component. A lanyard can be in rope made of synthetic fibres, in metallic rope, in strap or in chain.
CAUTION: A lanyard without energy absorber must not be used as a fall arrest equipment.

Some of our products are accredited under the regulations of many countries.

The products concerned and / or bear the following markings:

USA
Argentina
Brasil	CA
China	UK standards
Canada
Ukraine
Common Economic Space (Russia, Belarus, Kazakhstan)
United Kingdom
Mexico

Taking into account the level of risk covered, the Regulation defines the PPE categories and determines the various manufacturer’s obligations:
• PPE category 1: Protection against minor risks.
• PPE category 2: All PPE that are not category 1 or 3.
• PPE category 3: Protection against disability or fatality

It contains laboratory tests to check the conformity with resistance to impacts, to temperature, to humidity and corrosive atmospheres, and with mechanical and respiratory resistance.

It contains laboratory tests and practical performance tests to check the conformity with resistance to temperature, to impacts, to flame, to thermal radiation, to traction,
resistance to cleansers and disinfectants. Furthermore, the visual inspection must concern the marking and the manufacturers’ information guide.