Standards and directives
The common goal of our product managers and services is to offer reliable, sustainable, high-performance products in compliance with the regulations and/or standards of each territory where they are used.
It contains laboratory tests to check the conformity with resistance to handling and wear, to impacts, to flame and with respiratory resistance.
This standard is specific to the standard connection system of the cartridge for full face masks.
Equipment consisting of a mobile fall arrester with self-locking, integral with its flexible anchorage line (rope, cable…). An energy reducer (absorber) can be built-in in the equipment.
Equipment consisting of a mobile fall arrester with self-locking, integral with its rigid anchorage line (rail, cable…). An energy reducer can be built-in on the equipment.
Body securing device intended to stop falls. The full body harness can be made of straps, buckles and other elements; set and adjusted in a right way on the body of an individual to secure him during a fall and afterwards.
Component of a fall arrest equipment, which guarantees the stop of a fall from a height in safety by reducing the impact of the shock.
WARNING: If we associate a lanyard energy absorber, the total length of the entire device must not exceed 2 m.
Fall arrester with self-locking device and a self-retractable system for the lanyard. An energy reducer (absorber) can be built-in in the equipment.
Describes the markings and information (operating instructions) on or accompanying the PPE
against falls from a height.
Describes the equipment and test methods for PPE against falls from height.
Beschrijft de artikelen en de situaties voor individuele bescherming tegen valrisico’s.
This standard specifies the requirements for protective clothing aiming to signal the presence of the wearer visually, so that he may be detected and seen in hazardous situations, in all conditions of daylight, and night under illumination of car headlights. There are three classes of high-visibility clothing. Each class must have minimum surfaces of visible material constituting the garment; the higher the class, the more visible the garment:
CLASSE 3 | CLASSE 2 | CLASSE 1 | |
---|---|---|---|
Background material (Fluorescent) | 0,80 m² | 0,50 m² | 0,14 m² |
Retroreflective material (Bands) | 0,20 m² | 0,13 m² | 0,10 m² |
Marking:
X : Class of high visibility surface (from 1 to 3)
|
2 : Class of high visibility surface (from 1 to 3) Max. 25x : Optional marking, number of maximum washes authorized for the model. On this example, read: 25 washes (see indication of service temperature on the garment bag). |