#

Standards and directives

We operate in a regulated global market in many countries. Thus, we must manage requirements that may vary greatly between countries or regions.
The common goal of our product managers and services is to offer reliable, sustainable, high-performance products in compliance with the regulations and/or standards of each territory where they are used.
#
#

Standards and certifications

All you need to know about PPE standards

Reset all
Filter
Standards

EN ISO 20345: BASIC REQUIREMENTS FOR SAFETY FOOTWEAR

In reference to standard EN ISO 20344, this European standard defines the basic and the additional
(optional) requirements for safety footwear for the workplace, marked «S». The safety shoe is
equipped with safety toe caps designed to withstand a maximum impact of 200 joules and crushing
up to 15 kN.

Dokumenti PPWR (Packaging and Packaging Waste Regulation)

Dokumenti PPWR

EN812 : Bump caps for industry

MANDATORY 

Impact*: This PPE protects against impacts from knocks against structures or objects. It does not protect from the impact of a falling object at all. The
impact energy of the cap at the end of the test reached 12.25 J.
Penetration*: the tip of the mass used in the test (0.5 kg over 0.5 m) must not come into contact with the skull.
* The impact and penetration tests are performed at room temperature, at 50°C and at -10°C.
Should in no way be a substitute for an industry type helmet (EN397).

OPTIONAL

In extreme temperatures: impact and penetration tests are conducted at room temperature at -20°C or -30°C.
Protects against accidental short-term contact with a live electrical conductor up to 440 VAC.
Flammability: the helmet must not burn with fl ame emission more than 5 seconds after removal of the fl ame (F marking).